Emerald Air Handlers
An air handler is a very important part of your HVAC system and are necessary to keep the air in your home circulating properly. There are a number of components available in our Emerald family of air handlers.
- GACNF
- GADPF
- GAEPF
- GARC
- GARPF
- GARUF
- GASPF
- GAWUF
ACNF Series Ceiling-Mount Air Handlers
The ACNF Electric Heat Air Handler is designed to be ceiling-mounted. Its quiet operation and high performance makes the ACNF series a good choice for multi-family or lodging applications.
Standard Features
- Suitable for use with refrigerants R-410A (-16 models only) and R-22 (-16 and -1 models)
- Check flowrater for heat pump and cooling-only applications
- Direct-drive, resilient-mount, multi-speed motor
- Sequence-controlled and rust-resistant nickel chromium heating elements of 5, 6, 8, and 10 kW
- High-efficiency evaporator coil
- Quiet operation
- Available with and without heat
- ARI Certified
- ETL Certified
Cabinet Features
- Primary/secondary drain connecting in a high-temperature plastic drain pan
- Suitable for free-return installation (non-ducted return air)
- Galvanized-steel construction
- Factory-installed pull-type disconnect
- Easy service access
Accessories
- Heat Pump Shut-off Relay Kit: HPSK-01
- Ceiling Access Panels:
CAP-1/ 1L (louvered) fits ACNF18
CAP-2/ 2L (louvered) fits ACNF24
CAP-3/ 3L (louvered) fits ACNF30
ADPF Series Three-Speed Air Handler
The ADPF Dedicated Downflow Three-Speed Air Handler is suitable for use with refrigerants R-410A and R-22. The unit features a check flowrater expansion device and may be installed in a variety of locations.
Standard Features
- Suitable for use with refrigerants R-410A & R-22
- Check flowrater expansion device
- Direct-drive, multi-speed motor
- Transformer and blower time-delay on all units
- Dedicated downflow requires no modification in the field
- ARI Certified
- ETL Listed
Cabinet Features
- Fully painted cabinet with attractive Architectural Gray finish
- Built-in coiil has downflow drain pan with secondary drain connections
- Power supply entry at top
- Low-voltage entry on left side and top
Accessories
- 3 kW to 21 kW electric heat kits available as field-installed options
AEPF Series Air Handler
The AEPF Multi-Position, Variable-Speed Air Handler is suitable for use with refrigerants R-410A and R-22. This unit's blower motor allows for a soft start and stop. This allows for a quieter and more efficient operation and eliminates the cold blast of air upon heating start-up. Using an ECM™ motor, this air handler is ideal for new or retrofit applications
Standard Features
- Suitable for use with R-410A and R-22 refrigerants
- Check flowrater expansion device for cooling and heat pump applications
- Variable-speed motor
- Provides constant CFM over a wide range of static pressure conditions independent of duct system; provides low CFM for efficient fan-only operation
- Up to 14 adjustable airflow settings to optimized the system's CFM for each individual mode of operation
- Improved humidity control and comfort
- Compatible with heat pumps and variable-capacity cooling applications
- Multi-position: upflow, downflow, or horizontal
- Built-in coil has horizontal, vertical, and downflow drain pans with secondary drain connections
- ARI Certified; ETL Listed
Cabinet Features
- Fully insulated, heavy-gauge steel cabinet with attractive Architectural Gray finish
- Built-in filter rack for 1" filter (filter not included)
- Low-voltage cabinet connections; control circuit arranged to permit staging
- Power supply on top; low-voltage entry on top or side
- Factory-sealed to achieve 2% or less leakage rate with or without field-installed filter kits at 1.0" water gauge external duct static pressure.
AR Commercial Electric Air Handlers
The AR Commercial Multi-Position Air Handler features a factory-installed, internally mounted TXV. The 10-ton model is circuited for use with two 4- or 5-ton cooling-only or heat pump systems, or one 10-ton cooling-only or heat pump system. For indoor applications, all models are convertible to 460-3-60 from 208/230-3-60. The heavy-gauge, reinforced galvanized-steel cabinet with removable access panels makes servicing the unit faster and easier. The cabinet is insulated with a fiberglass blanket.
Standard Features
- Upflow or horizontal (left side) installation positions in 7.5- and 10-ton cooling-only or heat pump applications
- 10-ton model circuited for use with two 4- or 5-ton cooling-only or heat pump systems, or one 10-ton cooling-only or heat pump system
- All models convertible to 460-3-60 from 208/230-3-60
- Transformer and blower relay
- TXV control; 7.5-ton unit has one (1) thermal expansion check valve; 10-ton unit has two (2) thermal expansion check valves
- Draw-thru centrifugal blower is belt-driven for quiet, efficient operation
- Copper tube/aluminum fin coils
Cabinet Features
- Heavy-gauge, reinforced, galvanized-steel cabinet
- Fully insulated with fiberglass blanket
- Horizontal and vertical condensate pans
- Built-in filter rack (2" filter included)
- Entry on top of panel for both low and high voltage
- Removable access panels make servicing of unit faster and easier
Accessories
- 15-30kW electric heat kits available as field-installed options
ARPF Series Air Handler with Painted Cabinet
The ARPF Multi-Position, Multi-Speed Air Handler is suitable for use with refrigerants R-410A and R-22. The ARPF features a check flowrater expansion device as well as a direct-drive, multi-speed motor.
Standard Features
- Suitable for use with refrigerants R-410A and R-22
- Check flowrater expansion device
- Direct-drive, multi-speed motor
- Transformer and blower time-delay on all units
- Copper tube/aluminum fin coil
- ARI Certified; ETL Listed
Cabinet Features
- Fully insulated, painted steel cabinet with attractive Architectural Gray finish
- Built-in coil has horizontal, vertical, and downflow drain pans with secondary drain connections
- Built-in filter rack for 1" filter (filter not included)
- Power supply entry at top; low-voltage entry on top and both sides
- Factory-sealed to achieve 2% or less leakage rate with or without field-installed filter kits at 1." water gauge external duct static pressure
ARUF Series Air Handler with Galvanized Cabinet
The ARUF Multi-Position Air Handler is suitable for use with refrigerants R-410A and R-22. This unit features a check flowrater expansion device and may be installed in a variety of locations.
Standard Features
- Suitable for use with refrigerants R-410A and R-22
- Check flowrater expansion device for cooling-only and heat pump applications
- Direct-drive, multi-speed motor
- Transformer and blower time-delay on all units
- ARI Certified
- ETL Listed
Cabinet Features
- Rust-resistant, fully insulated steel cabinet
- Galvanized, leather grain-embossed finish
- Attractive Architectural Gray painted front panels
- Built-in coil has horizontal, vertical and downflow drain pans with secondary drain connections
- Built-in filter rack for 1" filter (filter not included)
- Power supply entry at top; low-voltage entry on left side and top
ASPF Series Multi-Position Air Handler with Energy-Saving Motor
The ASPF Multi-Position Air Handler is suitable for use with refrigerants R-410A and R-22. This unit's blower design includes an EEM (Energy-saving), fixed-speed motor that can enhance the efficiency of air conditioners and heat pumps.
Standard Features
- Suitable for use with refrigerants R-410A and R-22
- Check flowrater expansion device for cooling and heat pump applications
- Energy-saving, fixed-speed motor
- Enhances the performance of your air conditioner or heat pump
- Multi-Position: upflow, downflow, or horizontal
- Built-in coil has horizontal, vertical, and downflow drain pans with secondary drain connections
- ARI Certified
- ETL Listed
Cabinet Features
- Fully insulated, painted steel cabinet with attractive Architectural Gray finish
- Built-in filter rack for 1" filter (filter not included)
- Low-voltage cabinet connections
- Factory-sealed to achieve 2% or less leakage rate at 1.0" water gauge external duct static pressure
AWUF Series Wall-Mount Air Handler
The AWUF vertical stud- or wall-mount electric heat Air Handler features a direct-drive, multi-speed motor (to permit air volume flexibility) and fully insulated, galvanized steel construction.
Standard Features
- Coils with aluminum tubing
- Suitable for use with refrigerants R-410A (-16 models only) and R-22 (-16 and -1 models)
- Equipped with a Check Flowrater for cooling-only and heat pump operation
- Direct-drive, multi-speed motor allows air volume variation for heating/cooling
- Sequence-controlled, rust-resistant nickel chromium heating elements of 5,8, and 10 kW
- Factory-installed pull-type disconnect
- Built-in filter rack (filter included)
- ARI Certified
- ETL Certified
Cabinet Features
- Thermoplastic drain pan with bottom primary and secondary drain connections
- Built-in filter rack (filter included)
- Large chassis (2.5- and 3l-ton units) - front return only
- Small chassis (1.5- and 2-ton units) - front or bottom return
- Wall-hanging bracket provided
Accessories
- Wall access doors:
WAD-1 fits AWUF18 and AWUF24
WAD-2 fits AWUF30, AWUF36, and AWUF37